background image

La Crosse Technology, Ltd.  

Page 2 

 

Power requirements

 .....................................................................................................10 

Manually set time: Program Menu

 ............................................................................10 

Forecast Icons inaccurate

 ...........................................................................................11 

Weather station is blank: No letters, numbers or dashed lines

 ........................12 

 

BATTERIES 

 

 

Half of all warranty issues can be resolved with fresh batteries of the appropriate 

voltage.  

 

We suggest name brand alkaline batteries.   

 

Use batteries dated at least six years in advance of the current year. Batteries 

dated earlier than six years from now may still work, but may be unstable in 

performance.   

 

Alkaline batteries manufactured this year will have an expiration date 10 years 

in the future. Battery technology has improved and batteries will maintain 

voltage longer in storage. However, the environment the batteries reside in for 

the 10 years can deplete the power. 

 

Good name brand alkaline batteries make less noise, which reduces the chance 

of RF (radio frequency) interference from the battery compartment. A minimum 

voltage of 1.48V for each battery is necessary for proper performance.  

 

WEATHER STATION FACTORY RESTART 

 

The factory reset will return the wind speed station to its default settings. This will 

clear all previous recorded history, so you may want to write down data before 

taking this step. 

1.

 

Hold down both the WARNING and ALERTS button together for 5 second. This 

will clear all recorded weather data and reset the station's settings back to 

default 

2.

 

The weather station will fully populate, clear all records, then return to a normal 

display and search for outdoor sensors. 

3.

 

While searching for the outdoor sensors the Wind Speed, and Outdoor 

4.

 

Temperature/Humidity will show dashes. 

5.

 

Once connected to the outdoor sensors (allow 3 minutes) the Wind Speed, and 

6.

 

Temperature/Humidity will show current readings. 

7.

 

In the absence of wind, this reading will show 0.00. 

 

Dashes = Not connected to sensor 

Zero or current readings = Connected to sensor. 

 

BATTERY CHANGE 

 

TX141Wv2 Sensor: 

1. Grab the vented portion of the sensor and turn counter clockwise. 

2. Remove old batteries and install fresh “C” batteries. 

3. Carefully align and turn vented portion clockwise to tighten. 

4. Hold the WIND button on the weather station for 3 seconds to search for the  

    sensor.  

 

Summary of Contents for 327-1417BW













Reviews: