La Crosse Technology, Ltd.
Page 6
•
Month: Defined by Calendar Month i.e. January 1 - January 31
•
Year: Defined by Calendar Year i.e. January 1 - December 31
•
Total: running total since station was powered up.
HOW DO I RESET THE RAIN READINGS?
Your rainfall readings are reset individually.
1.
Press and release the RAIN button to view the history reading you wish to reset.
2.
Hold the MINUS button for 5 seconds to reset that rain value to zero.
3.
Press and release the LIGHT button to exit.
ALERTS: HOW DO I SET ALERTS ON MY STATION?
There are 10 programmable alerts to set on this station. Each alert is defaulted to OFF until
you choose to set and arm the alert.
Alerts:
•
Outdoor LOW Temperature
•
Outdoor HIGH Temperature
•
Outdoor LOW Humidity
•
Outdoor HIGH Humidity
•
Indoor LOW Temperature
•
Indoor HIGH Temperature
•
Indoor LOW Humidity
•
Indoor HIGH Humidity
•
24 Hour Rainfall
•
HIGH Wind speed (Current speed)
You will need to arm each alert you wish to set.
1.
Hold the ALERTS button for 3 seconds to enter alert set mode. The Outdoor LOW
temperature and OFF will show.
2.
Use the PLUS or MINUS button to arm the alert if you wish to set the value.
3.
Press and release the ALERTS button and the alert value will flash. Use the PLUS or
MINUS button to adjust the value.
4.
Press and release the ALERTS button to move to the next alert.
5.
Continue steps 2-4 to view or set all of the alerts.
Note: To skip one or more alerts, simply press and release the ALERTS button until you
see the alert you wish to set. The follow steps 2-4 above.
WHAT HAPPENS WHEN AN ALERT VALUE IS REACHED?
•
When armed alert value is reached, station will beep 5 times each minute, until out of
the alert range.
•
The flashing alert icon will indicate the type of alert.
•
Press any button to stop the alert from sounding.
•
The alert icon will continue flashing while value while value is in alert range.
