8
Wall Mount
Choose a shaded location (under an overhang) for the transmitter that is within the confirmed wireless
reception range of the Digital Atomic Clock for accuracy.
Install one mounting screw (not included) into a wall leaving approximately ½ of an inch (12.7mm)
extended.
Place the hanging hole (on the back of the transmitter) onto the mounting screw and gently slide the
transmitter down onto the mounting screw to secure it into place.
IMPORTANT:
For true temperature readings, mount the transmitter out of direct sunlight on a North-facing wall or in any
other well shaded area like under an eave or deck rail. The maximum transmitting range in open air is over 200-feet (60
meters). Obstacles such as walls, windows, stucco, concrete, and large metal objects can reduce the range. Place the
transmitter at least 6 feet in the air to improve signal transmission.
CARE AND MAINTENANCE:
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
Do not expose the Digital Atomic Clock to extreme temperatures, vibration or shock.
Keep Digital Atomic Clock dry.
Clean Digital Atomic Clock with a soft damp cloth. Do not use solvents or scouring agents.
The Digital Atomic Clock is not a toy. Keep it out of reach of children.
The Digital Atomic Clock is not to be used for medical purpose or for public information, but is determined for home use
only.
The specifications of this Digital Atomic Clock may change without prior notice.
Improper use or unauthorized opening of housing will void the warranty.
If the Digital Atomic Clock does not work properly, change the batteries.
SPECIFICATIONS:
Indoor
:
Temperature Range:
+32°F to +122°F (0°C to 50°C)
Interval:
About every 30 seconds
Outdoor
:
Temperature Range:
-40°F to 140°F (-40°C to 60°C)
Alkaline Batteries: -20°F to 140°F (-28.8°C to 60°C)
Lithium Batteries: -40°F to 140°F (-40°C to 60°C)
Temperatures below - 20°F (-28.8°C) require Lithium batteries in the outdoor sensor.
Distance:
Over 200 ft. (60 meters) RF 433MHz (open air)
Interval:
About every 30 seconds
Power:
Digital Atomic Clock:
2-AA, IEC, LR6 batteries (not included)
TX14 Transmitter:
2-AA, IEC, LR6 batteries (not included)
Battery Life:
TX14 Transmitter
Battery Life:
Battery life is over 24 months when using reputable battery brands for both Alkaline and
Lithium batteries
Digital Atomic Clock
Battery Life:
Over 12 months.
Dimensions:
Digital Atomic Clock:
11” W x 1.1” D x 8.54” H (280 x 28 x 217 mm)
TX14 Transmitter:
2.5” L x 3.98” H x 1.42” W (64 x 101 x 36mm)