background image

4 | 

P a g e

 

 

 

Please be sure you have selected your time zone from the list in the Settings menu.  

 

When the Atomic time signal is received, the clock will set to the time zone selected. Default 
is Eastern Time. 

 
Reception: 

 

The WWVB time signal can be received up to 2,000 miles away from Boulder Colorado. 

However, due to the nature of the Earth’s Ionosphere, reception is very limited during 

daylight hours. The Radio-controlled display will search for a signal every night when 

reception is best.  

 

Allow up to 5 nights for the change from Daylight Savings Time to Standard Time and vice-

versa to occur, depending on your location and atmospheric conditions. 

  

Loss of WWVB signal, follow these steps:  

1.

 

Check for a Tower Icon showing on the display near the time. The tower icon indicates 

successful reception of the WWVB signal in the past 24-hours.  

2.

 

Check that the Clock is in the correct Time Zone.  

3.

 

Check that ATOMIC is ON. This must be ON to receive a WWVB atomic time signal. 

4.

 

Check that the DST indicator is ON. If the indicator is OFF the clock will not change into or 

out of Daylight Saving Time. 

5.

 

Position clock with front or back facing Fort Collins, Colorado so the widest part of the 

antenna is positioned to receive. 

 

For information about WWVB visit: 

http://bit.ly/AtomicTime

   

WHAT IS DESIRED HOUR (TIME ADJUST) AND HOW DO I SET IT? 

Have your clock match other times around the world by setting a Desired Hour, kept accurate 

by the Atomic Time Signal. Note: Only the hour can be changed.  

 

Set Desired Hour: 

 1. Hold the 

 button until the Hour flashes, “Desired Hour” will show.  

2. Press the + (PLUS) button to adjust the hour. Press the - (MINUS) button to reset hour to 

“current hour”. 

3. Press the 

 button to confirm and exit. 

 

Switch between Desired Time and Local time: 

• Press the 

 button to switch between Desired Time and Local Time. 

• Desired Time is indicated with the 

 icon.      

CAN I CHANGE THE CALENDER DISPLAY? 

 

Press the   button to change how the Calendar is displayed. 

 

Full Weekday 

 

Month/Date/Year 

 

Weekday/Month/Date. 

Reviews: