La Crosse Technology, Ltd
Page 5
No WWVB Tower Icon
The digital clock has not received a WWVB time signal in the past 24 hours.
Position
the digital clock for better reception.
Press and release the PLUS button to send the digital clock on a WWVB signal search
at night.
Allow up to 5 nights to receive the time signal.
Set Time Alarm
The alarm will be active when set.
1.
Press and release ALARM: Alarm Hour will show
2.
Use the +/- button to select.
3.
Hold then release ALARM 3 seconds: Alarm Minutes will show
4.
Use the +/- button to select.
5.
Press and release the ALARM button to confirm and exit.
Activate/Deactivate Time Alarm
The alarm is active when set.
From normal time display, Press and release and release the ALARM button to
deactivate or activate the alarm.
The alarm icon (clock) will show when active.
Snooze Alarm
When the alarm sounds, Press and release the SNOOZE button to silence the alarm for
10 minutes.
The snooze icon Zz will flash.
Press and release any button except SNOOZE to silence the alarm for 24 hours.
This is a crescendo alarm. It will sound for 2 minutes then shut off if no buttons are
Press and released.
Indoor Comfort Statement
The indoor comfort indicator tells you at a glance if the humidity level in your home is
humid, comfortable or dry.
With this indicator, you can decide to add or remove humidity for optimal comfort.
Digital clock has distorted or frozen display
Explanation:
On a brand new digital clock, check for thin plastic film of
printed scratch
guard
that may be on the screen of the digital clock. This thin piece of plastic has printed
numbers for store displays. When the batteries are installed, the “real” numbers show
behind the printed scratch guard and create distortion.
With all power removed, the digital clock should be blank.
If numbers still appear, please check for scratch guard.
