background image

Stay in Touch 

Follow La Crosse Technology on YouTube, 

Twitter, Facebook and Instgram.

Ask questions, watch setup videos, and 

provide feedback on our social media outlets.

Low Battery Indicator 

  By the Indoor Temp, replace clock batteries.

  By the Outdoor Temperature, replace 

   sensor batteries.

Care + Maintanence

  Do not mix old and new batteries. 

  Do not mix Alkaline, Lithium, standard, or 

rechargeable batteries. 

  Always purchase the correct size and grade 

of battery most suitable for intended use.

  Clean the battery contacts and also those of 

the device prior to battery installation.

  Ensure the batteries have with correct 

polarity (+ / -).

  Remove batteries from equipment that will 

not to be used for an extended period.

  Promptly remove expired batteries.

Specifications 

Projection Clock (616-1410B / 616-41667)

  

Temperature Range: 

   32°F to 99°F (0°C to 37°C)

  

Power Requirements:

 

   5 volt Power cord AC6: 

GPU280500150WAOO

   

   Optional: 3-AAA LR3, IEC, batteries for 

   backup (not included)

The plug on the power adapter is intended to 

serve as the disconnect device, the 

socket-outlet shall be installed near the 

equipment and shall be easily accessible. 

  

Dimensions: 

   5.83” L x 1.61” L

 x 

4.06” H 

   (

14.8cm L x 4.1cm W x 10.3cm H)

Outdoor Sensor (TX141-Bv3)

  

Temperature Range:

 

   -40°F to 140°F (-40°C to 60°C)

  

Transmission Range:

 Over 330 ft. open air 

   (100 meters)  RF 433MHz

  

Update Interval: 

About every 51 seconds

  

Power: 

2-AA, IEC, LR6 batteries 

(not included)

  

Battery Life: 

Over 12 months 

  

Dimensions:

 

   1.57” L x 0.79” W x 5.12” H 

   (4.0cm L x 2.0cm W x 13.0 H cm)

9

Designed in La Crosse, Wisconsin  

  

Made in China  

  Printed in China  

  

DC 030821

Summary of Contents for 616-1410B











Reviews: