Optional Add-On Sensor
Lost Connection
ADD-ON SENSOR
•
The Sensor Reception Icon will disappear from the bottom right of the LCD
and the clock will search for up to 3 minutes every hour to try to reestablish the
connection.
•
To manually reconnect, hold the
+
button on the top of the clock to search for
the sensor.
•
Dashes will show while searching for the sensor and the icon will flash for
up to 3 minutes or until the sensor is connected.
17
•
If the sensor loses connection to the clock for any reason, the clock will show
NO after 30 minutes of disconnection.
The icon will appear when the sensor
batteries needs to be replaced.
Low Battery
18
Specifications
APPENDIX
Power Requirements:
5.0V Power Cord
(Included) HX18H-0503000-AU-001
CR2032 Battery for backup (Included)
The plug on the power adapter is intended
to serve as the disconnect device, the
socket-outlet shall be installed near the
equipment and shall be easily accessible.
Projection Brightness:
2 Intensity OFF
LCD Brightness:
4 Intensity OFF
(Programmable Auto-Dim Backlight Option)
Programmable Snooze Duration:
5 to 120 Minutes
Wireless Charger Power Output:
5 Watts
USB “A” and “C” Charging Port:
1 Amp Maximum Current
(Charging Cords Not Included)
Indoor Temperature Range:
32
°
F to 122
°
F
(0°C to 50°C)
Indoor Humidity Range:
10% to 99% RH
Settings Backup:
The CR2032 Battery
will save Time and Alarm Settings when
power is lost. Projection will not show.
8.39 in.
(21.31 cm)
4.81 in.
(12.21 cm)
1.80 in.
(4.57 cm)
0.35 in.
(0.88 cm)
4.35 in.
(11.04 cm)
Summary of Contents for 616A-1413
Page 13: ......
