background image

19

Warranty

Recycling & Disposal

Caution!

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on 
this product, relating to manufacturing defects in materials and workmanship.
For full warranty details, you can visit: 

www.lacrossetechnology.com/support

Please consider the environment when 
deciding to dispose of this product.
Although household electronics are 
generally safe to use on a daily basis, 
incorrect disposal can cause negative 
and potentially irreversible impacts on 
our environment. 

Check with local donation centers to 
see if your product can be donated for 
future use. If disposal is the only option, 
federal agencies, local governments, and 
certified retailers may have electronic 
recycling programs in place. Programs 
may vary based on location. 

Please Recycle

The manufacturer is not responsible for 
any radio or TV interference caused by 
unauthorized changes or modifications 
to this equipment. Such changes or 
modifications could void the user authority 
to operate the equipment.

All rights reserved. 

This manual may not 

be reproduced in any form, even in part, or 
duplicated or processed using electronic, 
mechanical or chemical process without the 
written permission of the publisher.

This booklet may contain errors or misprints. 
The information it contains is regularly 
checked and corrections are included 
in subsequent editions. We disclaim any 
responsibility for any technical error or 
printing error, or their consequences. All 
trademarks and patents are recognized.

La Crosse Technology, Ltd

  

  

2830 S. 26

th

 Street  

  

La Crosse, WI 54601

APPENDIX

20

FCC Statement

1.This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to part 
15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or 
more of the following measures:
• Reorient or relocate the receiving antenna.
•I ncrease the separation between the equipment and 
   receiver.
• Connect the equipment into an outlet on a circuit different 
   from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician 
   for help.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set 
forth for an uncontrolled environment and it also complies 
with Part 15 of the FCC RF Rules. This equipment must 
be installed and operated in accordance with provided 
instructions and the antenna(s) used for this transmitter 
must be installed to provide a separation distance of at 
least 20 cm from all persons and must not be co-located 
or operating in conjunction with any other antenna or 
transmitter. End-users and installers must be provided with 
antenna installation instructions and consider removing the 
no-collocation statement. 

APPENDIX

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, 
including interference that may cause undesired operation.
 
Caution! 
Any changes or modifications not expressly approved by 
the party responsible for compliance could void the user’s 
authority to operate the equipment.
 
2. The interference potential of the device could cause the 
interference to the system whose fundamental is 110.5 KHz 
to 205 KHz.

Summary of Contents for 616A-1413














Reviews: