background image

Page | 9        

 www.lacrossetechnology.com/support 

           BBB86088 

Let’s Get Social

JOIN THE CONVERSATION

Ask questions, watch detailed setup videos, and provide 

feedback on our social media channels!

• Do not mix old and new batteries

• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

• Always purchase the correct size and grade of battery most suitable 

   for intended use.

• Replace all batteries of a set at the same time.

• Clean the battery contacts and also those of the device prior to 

   battery installation.

• Ensure the batteries are installed with correct polarity ( + and - ).

• Remove batteries from equipment when it is not to be used for an 

   extended  period of time.

• Promptly remove expired batteries.

Care and Maintenance

La Crosse Technology, Ltd. provides a 1-year limited time warranty 

(from date of purchase) on this product relating to manufacturing 

defects in materials & workmanship. 

Before returning a product, please contact our friendly customer 

support or visit our online help:  

Phone: 1-608-782-1610   

Online:  

www.lacrossetechnology.com/support 

 

Warranty and Support

Summary of Contents for BBB86088













Reviews: