background image

Model: BBB87740   www.lacrossetechnology.com/support      

Page | 5

  

itself perfectly. If it does not receive a time signal, consider the following: 

 

Battery: 

The clock must have a fresh battery to receive and process 

the time signal. 

 

Location: 

Try a different location, ideally near a window. Your clock 

should be at least six feet from computers, TVs, air conditioners, 
other radio-controlled clocks and other electrical appliances that 
cause interference. 

 

Weather: 

Electrical storms between you and Colorado during the 

night will interfere with the WWVB signal. 

 

Care and Maintenance 

  

 

Do not mix old and new batteries

 

 

Do not mix Alkaline, Standard, Lithium or Rechargeable 
Batteries

 

 

Always purchase the correct size and grade of battery most suitable 
for intended use. 

 

Replace all batteries of a set at the same time. 

 

Clean the battery contacts and also those of the device prior to 
battery installation. 

 

Ensure the batteries are installed with correct polarity (+and -). 

 

Remove batteries from equipment with is not to be used for an 
extended period of time. 

 

Remove used batteries promptly. 

 

Do not expose to extreme temperature, vibration or shock.  

 

Clean with a soft damp cloth. Do not use solvents. 

 

The product is not a toy. Keep it out of reach of children. 

 

The product is not to be used for medical purpose or for public 
information. It is intended for home use only. 

 

The specs of this product may change without prior notice. 

 

Improper use or unauthorized opening of housing voids warranty. 

 

Warranty and Support Information 

 

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from 
date of purchase) on this product relating to manufacturing defects in 
materials & workmanship.  
 
View full warranty details online at: 

www.lacrossetechnology.com/warranty_info.pdf  
 
For warranty work, technical support or other information contact: 

La Crosse Technology, Ltd 
2830 26

th

 Street S. 

La Crosse, WI 54601 
 

Summary of Contents for BBB87740







Reviews: