La Crosse Technology, Ltd
Page 4
Set Time Alarm
HOUR: Press and hold down the ALARM button for 2 seconds until the Hours flash. Use the +/-
buttons to set the Hour. Press ALARM button to confirm the setting
MINUTES: The Minute display of the Alarm time starts to flash. Use the +/- to set the required
minute. Press ALARM button to confirm the setting and to end the setting procedure.
Activate/Deactivate Time Alarm
Hold the ALARM button to enter alarm settings. “AL” will show.
Press and release ALARM to activate/deactivate the alarm.
The bell icon will show when active.
Note: When the alarm sounds, it will continue for two minutes then shut off.
Snooze Alarm
When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 10 minutes.
This crescendo alarm will sound for 120 seconds if not deactivated. Press any button to stop
the alarm for 24 hours.
Digital clock has distorted or frozen display
Explanation: On a brand new digital clock, check for thin plastic film of printed scratch guard that
may be on the screen of the digital clock. This thin piece of plastic has printed numbers for store
displays. When the batteries are installed, the “real” numbers show behind the printed scratch
guard and create distortion.
With all power removed, the digital clock should be blank.
If numbers still appear, please check for scratch guard.
Power:
Check that the batteries and AC cord are installed correctly.
This is generally a power related issue.
Batteries
may be overpowered or underpowered.
Remove batteries from alarm clock.
Press any button 20 times. Leave the batteries out of the display for 2 hours.
Insert AC cord and batteries into the alarm clock.
Insert batteries into the digital clock.
Digital clock is blank: No letters, numbers or dashed lines
Check that the batteries and AC cord are installed correctly.
This is generally a power related issue.
Batteries
may be overpowered or underpowered.
Remove batteries from alarm clock.
Press any button 20 times. Leave the batteries out of the display for 2 hours.
Insert AC cord and batteries into the alarm clock.
Insert batteries into the digital clock.
Day of the week is incorrect.
Check the year setting in the
The day of the week sets automatically based on the setting of the year, month and date.
Digital clock has missing segments
Explanation: When parts of numbers, letters, or pictures are missing on the display, it is often
power related.
With all power removed, the digital clock should be blank.
If numbers still appear, please check for scratch guard.
Power:
