2
Set Time Alarm
In normal mode, press and release the TIME ALARM button once to
show alarm time. Hold the TIME ALARM button for three seconds to
enter alarm set mode.
HOUR: The
Hour
will flash, use the ARROW buttons to set the hour,
and press TIME ALARM button to confirm. Then press the TIME
ALARM button again switch to minute setting.
MINUTES: The
Minutes
will flash, use the ARROW buttons to set
the minutes, and press TIME ALARM button to confirm.
Press the TIME/DATE button to return to normal mode
Note:
When no buttons are pressed for ten seconds the Temperature
Station will save the last change and default back to normal mode.
Activate/Deactivate Time Alarm
In normal mode, press and release the TIME ALARM button once to
show alarm time.
Press and release the TIME ALARM button repeatedly to turn the
alarm ON/OFF. The alarm icon appears when alarm is activated.
Snooze
When the alarm sounds press the TIME ALARM button to snooze the
alarm for 10 minutes. The snooze option can be repeated three times.
Note
: while the alarm sounds press any button
except
the TIME
ALARM button to turn the alarm off.
LOW BATTERY
When this icon appears in the outdoor (OUT) readings section,
replace the batteries in the outdoor transmitter.
MIN/MAX
The Temperature Station will show the daily minimum and maximum
temperatures each day starting at midnight (12:00 AM). The
Temperature Station automatically resets the min/max temperatures at
midnight (12:00 AM).
View MIN data:
Press and release the MIN button to
view the minimum Indoor and Outdoor Temperatures.
Reset MIN data:
Hold the MIN button for 3 seconds and
the Indoor and all Outdoor Minimum Temperatures will
be reset to current temperatures.
View MAX data:
Press and release the MAX button to
view the maximum Indoor and Outdoor Temperatures.
Reset MAX data:
Hold the MAX button for 3 seconds
and the Indoor and all Outdoor Maximum Temperatures
will be reset to current temperatures.
TEMPERATURE ALERTS:
Press
and release the TEMP ALERTS button to
toggle between the temperature alerts.
Hold
the TEMP ALERTS button to set
individual high and low alerts.
The UP ARROW button (on back) will increase temperature
alert value in alert set mode (flashing).
Turn alert ON when alert is selected but not flashing.
The DOWN ARROW button (on back) will decrease values
when temperature alert flashes.
Turn alert OFF when alert is selected but not flashing.
The bell icon indicates an alert is active.
One or all the temperature alerts may be set. Range for outdoor
temperature alert: -40°C to 60°C (-40°F to 140°F)
Select Temperature Alert Values
Hold the TEMP ALERTS button for three seconds to enter alert setting.
OUTDOOR HI
alert will flash where the outdoor temperature shows.
Press the ARROW buttons to set the alert value, and press the
TEMP ALERTS button to confirm. Then press the TEMP ALERTS
button again switch to OUTDOOR LOW setting.
OUTDOOR LO
alert will flash where the outdoor temperature shows.
Press the ARROW buttons to set the alert value, and press the
TEMP ALERTS button to confirm and exit.
Note:
After selecting temperature alert values use the next step to turn
individual alerts ON or OFF.
Temperature Alerts ON/OFF
In normal mode, press and release the TEMP ALERTS button to toggle
between:
o
Outdoor HI
o
Outdoor LO
Press the UP ARROW button (Alert ON) to turn the selected alert
ON. The alert icon appears when alarm is activated.
Press the DOWN ARROW button (Alert OFF) to turn the selected
alert OFF.
Note:
When no temperature alerts are set the
Temperature Alert area will show ALERTS OFF.
Temperature alert rings
When temperature alert is ringing, corresponding alert
icon will flash.
The alert will ring for five seconds every minute, until the
temperature is out of alert range.
Press any button to stop alert. The alert icon will still show.
Turn alert OFF: In normal mode, press and release the TEMP
ALERTS button to select the alert to turn off. With HI or LO alert
selected, press the DOWN ARROW button to turn that alert OFF.
TEMPERATURE TREND ICONS:
The indoor and outdoor temperature trend indicators will update every
30 minutes or less. These trends represent temperature changes over
the past three hours.
Temperature rising more than 1°C/ 2°F in the past three
hours
Temperature has
not changed
more than 1°C/2°F in the
past three hours.
Temperature falling more than 1°C/ 2°F in the past three
hours
POSITION THE TEMPERATURE STATION:
Choose a location for the Temperature Station that is within range of
the outdoor transmitter. The Temperature Station has a
built in base to sit on a table or desk.
Choose a location 6 feet or more from electronics such
as cordless phones, gaming systems, televisions,
microwaves, routers, baby monitors, etc., which can
prevent signal reception.
Be aware of electrical wires and plumbing within a wall.
Best reception is achieved when the front or the back of
the Temperature Station is facing the outdoor
transmitter. This allows a larger portion of the antenna to
receive a signal.
POSITION THE WIRELESS OUTDOOR TRANSMITTER:
Once the Temperature Station shows the outdoor temperature, place it
and the transmitter in the desired locations and wait approximately 1-
hour before permanently mounting the transmitter to ensure that there
is proper reception. The transmitter should be mounted vertically, in a
shaded, protected area, at least 6 feet from the ground to avoid
