11
When the monitoring of an electrical appliance is
complete; simply turn the appliance off; remove the
Cost Control from the outlet and the remove the
appliance from the Cost Control. However, should
further monitoring be required, simply leave the
appliance and Cost Control plugged in and take
readings from the display.
Notes:
The above illustrations shown assume a
daily value of $7.00 and 7 days per week, 30 days a
month and 12 months a year (to alternate between these
displays simply press the “COST” key.
“OFL” will be displayed on the LCD should any cost
forecasting reading be over the 6-digit display range.
As the price of a kWh unit does not change (unless by
the Electric Company) only the Total Cost display
(actual electricity used per day, month and year)
requires resetting once the Cost Control has completed
a reading. To reset, press and hold down the “COST”
key (for approximately 4 seconds) and all values (with
the exception of the Tariff- cost per kilowatt hour) will
d) Total Cost is:
