Model: K84377 www.lacrossetechnology.com/support pg. 3
Program Menu
1. Carefully remove LCD from the white case.
2. Hold the MODE button until the
hours
flash.
3. Press and release the + button to adjust the hours.
4. Press and release the MODE button and the
minutes
will flash.
5. Press and release the + button to adjust the minutes.
6. Press the MODE button to return to the temperature display.
Mounting
Indoor Use:
1. Remove the window thermometer from the mounting holder.
2. Clean and dry the area to mount the window thermometer so the
adhesive will stick.
3. Remove the thin cover from the adhesive to reveal the sticky side.
4. Carefully place the mounting holder with the opening facing up.
5. Insert the window thermometer.
Outdoor Use:
1. Choose an outdoor window location that is fairly dry and shaded for
accurate readings.
2. Remove the window thermometer from the mounting holder.
3. Clean and dry the area to mount the window thermometer so the
adhesive will stick.
4. Remove the thin cover from the adhesive to reveal the sticky side.
5. Carefully place the mounting holder with the opening facing up.
6. Insert the window thermometer.
Avoid direct sunshine as it will cause false high temperature readings.
Constant direct sunlight may fade the LCD, making it difficult to read.
Due to the heat emission and sheltered location of your window, the
temperature may read higher with a window mounted location then at a
free unsheltered location outside.
Care & Maintenance
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable
Batteries
Always purchase the correct size and grade of battery most suitable
for the intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to
battery installation.
