• Always purchase the correct size and grade of battery most suitable
for intended use.
• Clean the battery contacts and also those of your clock prior to battery
installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment when it is not used for an extended
period of time.
• Promptly remove an expired battery.
• The specifications for this wall clock may change without prior notice.
• Improper use or unauthorized opening of movement or clock housing
will void any warranty.
CARE & MAINTENANCE
Battery Requirements:
1 AA (IEC, LR6, 1.5V) required in the
Battery Compartment (Alkaline recommended)
Battery Life:
12 months
SPECIFICATIONS
POWER UP
1. Insert 1 fresh AA alkaline battery, according to polarity, into the
snug Battery Compartment.
2. Rotate the Time Set Wheel to set the time.
3. Mount on a wall and enjoy!
Note:
The quartz movement will keep the clock running accurately.
If the clock does not operate, or steadily loses time, replace the
battery.
Time Set
Wheel
Battery
Compartment
AA
Learn more from our video:
REMOVE COVER FROM MOVEMENT
1. Open: Pull up on the square cover to access the battery
compartment.
2. Close: Replace the cover over the movement and press down.
MOUNTING
1. Be sure the Cover is in the closed position.
2. Use the top Hanger Hole to mount the clock.
Lift off to
access
Battery
Compartment
