background image

Warranty and Support

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to 

manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support 

with questions or visit our online help:

Phone: 1-608-782-1610

Online Product Support and Registration: 

www.lacrossetechnology.com/support 

 

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 

that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver. 

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help. 

This device must not be co-located or operating in conjunction with any other antenna or transmitter. 

Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and 

(2) This device must accept any interference received, including interference that may cause undesired operation.

Caution!

 

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this 

equipment. Such changes or modifications could void the user authority to operate the equipment.

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this 

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located 

or operating in conjunction with any other antenna or transmitter 

All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using 

electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or 

misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim 

any responsibility for any technical error or printing error, or their consequences. 

All trademarks and patents are recognized.

Specifications

• Rainfall: 0-393.6 inches (0-9999 mm)

• Transmission Range: 330 ft (100 m) RF 915MHz open air

• Batteries: 2-AA, IEC, LR6 batteries (not included)

• Battery Life: over 24 months with reputable batteries

• Dimensions: 6.00” L x 5.10” W x 4.21” H  (152 x 130 x 107mm)

If you have ideas for features or support solutions you’d like to see us make, please let us know! We truly want to make own-

ing a La Crosse Technology product not only a practical experience, but also a fun one.  

So email us at: 

store@lacrossetechnology.com

Help Us, Help You!

Summary of Contents for LTV-R1

Page 1: ...ccording to polarity Press the Funnel Release Tabs on each end and lift off the funnel Pinch the four Battery Release Tabs under the rocker to access battery compartment AA AA Important Remove the twist tie from below the rocker The twist tie secured the rocker for shipment Power ...

Page 2: ... Unfortunately since insects think of rain sensors as personal hotels placing the sensor 3 6 feet above ground may deter the insects This is a self emptying sensor but be sure your unit is not sitting in a depression that would prevent rain from draining out of the bottom Your rain sensor should be accessible to allow for periodic cleaning of leaves or other debris that may clog the funnel Install...

Page 3: ... Main Menu select Devices under Add Edit 3 On Edit Devices page select ADD DEVICE 4 Scan Device ID Scan the bar code on your sensor or press inside the Device ID search box to enter your code manually Once entered select Search 5 On Confirm Device page Confirm the sensor image and model number are correct and select YES 6 On Enter Device and Location Names page enter Device Name and select a locat...

Page 4: ...ration is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Caution The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment Such changes or modifications could void the...

Reviews: