background image

     

 

          

RADIO CONTROLLED ALARM CLOCK WITH SOLAR PANEL 

OPERATING MANUAL 

INTRODUCTION: 

Congratulations on purchasing this Alarm Clock with solar panel with DCF-77 radio-
controlled time. The operation of this product is simple and straightforward and by 
reading this operating manual, users will receive the optimum benefits of all its 
features. 

 

The alarm clock 

 
 
 

 

 
 
 

FEATURES: 

 

DCF-77 Radio controlled clock with manual setting option 

 

24 hours time display 

 

Calendar: date and month  

 

Alarm snooze programmable duration (1-59 min) 

 

Time zone setting (±9 hours) 

 

Two independent alarm time settings 

 LCD 

back-light 

 

Rechargeable alkaline 1,5V battery  

 

SETTING UP: 

SNOOZE/

24HR AL

/

 key 

Battery cover 

 

 

Battery compartment 

 

 

Battery cover 

 
 
1. 

Firstly, flip open the battery cover at the back of the alarm clock and remove the 
insulation plastic piece from the battery compartment.

 

2.  Checking the correct polarization, insert 

the provided 1.5V rechargeable alkaline 

battery

 into the battery compartment and replace the cover. 

Note:  

The included battery is a rechargeable alkaline battery. It needs to be inserted into 
the battery compartment as power source for normal operation. The solar panel itself 
does not provide enough power to operate the clock. 

AL/MIN key 

AL/HR

 key 

Solar panel 

Summary of Contents for RADIO CONTROLLED ALARM CLOCK WITH SOLAR PANEL









Reviews: