2 |
P a g e
Why does my Temp/Humidity reading come and go?
What is Distance | Resistance | Interference?
Can I change batteries in my sensors without losing data?
.......................................................................................... 10
FACTORY RESET: How do I factory reset my station?
How do I view my HI and LO History Readings?
How do I RESET History Readings?
“NO” reading for Extra sensors?
BATTERIES: WHAT DO I NEED TO KNOW ABOUT BATTERIES?
•
Good fresh batteries are important for best performance in your sensors and as backup in
your clock.
•
Batteries with an expiration date of 2028, were manufactured in 2018.
•
We recommend batteries with an expiration date 6 years in advance of the current year for
best performance.
•
A minimum voltage of 1.48 v per battery is required for best performance.
•
Lithium batteries may be used in outdoor sensors. Alkaline batteries for the clock.
HARDWARE: SENSORS AND STATION
Your S77925 station comes with:
TX141TH-Bv3 433MHz RF.
WHAT ARE THE POWER REQUIREMENTS FOR THIS STATION?
TX141TH-Bv3: 2 “AA” batteries
S77925: 5-volt power adapter AC6: GPU280500150WAOO
Optional: 3 “AA” LR6 Batteries
SETUP: HOW DO I SETUP MY STATION?
1.
Insert 2-AA batteries into your Outdoor Sensor.
2.
Insert the 5 volt power cord into an outlet, then into your Weather Station. Optional: Insert
3-AA batteries for backup.
3.
Once the sensor is reading to your station, place it outside in a shaded location to
protect it from the sun’s heat. Allow up to 10 minutes for sensors to connect.
