13 |
P a g e
Add Extra Sensors
1. Install batteries into your extra sensor(s).
Note: For Temp/Humidity sensors, be sure to select different channels (1,2,3) before you insert
batteries.
2. Hold the EXTRA button until the Reception Indicator
starts to animate. This will start a
search for your sensors.
3.
Your sensor(s) should connect within the next few minutes. Press the EXTRA button to cycle
through Extra Sensor and Pressure data. The Auto Scroll Icon will appear when activated.
Note: To Stop the Auto Scroll continue press the EXTRA button until the icon disappears. The
station will stay on the last item (sensor or pressure) displayed.
Purchase Extra Sensors:
lacrossetechnology.com/products/S77925#parts
to find and purchase compatible add-on
sensors.
“NO” READING FOR EXTRA SENSORS?
•
If a sensor loses connection to the station for any reason, the station will show NO after 30
minutes.
•
The station will search for 3 minutes every hour to reconnect with sensor.
•
Hold the EXTRA button 2 seconds to search for the sensors in the Extra Sensor Area
•
Icon will flash while searching for sensor. Extra sensor area will show dashes during the
search. When sensor is received the icon will be solid.
•
If no sensor received, icon disappears after 3 minutes of searching if sensor is not found.
•
NO will again show in the outdoor sensor area.
HISTORY FOR EXTRA SENSORS?
When Rain sensor is added: Press HISTORY button and start with Rain History:
•
1 Hour
•
24 Hour
•
7 Days, Month
•
Year
•
Total
•
Then view HI/LO Temperature/Humidity Records, Feels Like and Dew Point.
