4 |
P a g e
daylight hours. The Radio-controlled display will search for a signal every night when
reception is best.
•
Allow up to 5 nights for the change from Daylight Savings Time to Standard Time and vice-
versa to occur, depending on your location and atmospheric conditions.
Loss of WWVB signal, follow these steps:
1.
Check for a Tower Icon showing on the display near the time. The tower icon indicates
successful reception of the WWVB signal in the past 24-hours.
2.
Check that the Weather Station is in the correct Time Zone. This station offers seven time
zones listed in letter format (default is EST):
•
Atlantic
•
Eastern
•
Central
•
Mountain
•
Pacific
•
Alaskan
•
Hawaiian
3.
Check that ATOMIC is ON. This must be ON to receive a WWVB atomic time signal.
4.
Check that the DST indicator is ON. If the indicator is OFF the weather station will not
change into or out of Daylight Saving Time.
5.
Position station with front or back facing Fort Collins, Colorado so the widest part of the
antenna is positioned to receive.
•
For information about WWVB visit:
http://bit.ly/AtomicTime
HOW DO I MANUALLY SET THE TIME?
Note: Only press or hold one button at a time.
1.
Hold the SET button 2 seconds to enter settings mode.
2.
Press the OUT/+ or - button to adjust the flashing values.
3.
Hold the OUT/+ or - button to adjust quickly.
4.
Press the SET button to confirm adjustments and move to the next item.
5.
Press the LIGHT button at any time to exit.
Settings Order:
•
Greeting HELLO
•
Language (English, Spanish, French, German)
•
Beep ON/OFF
•
Atomic ON/OFF
•
DST: AUTOMATIC ON/ALWAYS ON/ALWAYS OFF
•
Time Zone
•
12HR/24HR
•
Hour
•
Minute
•
Year
