11
Add-On Temperature & Humidity Sensor
EXTRA SENSORS
Purchase Your Add-On Sensor at
(or scan QR Code)
:
www.lacrossetechnology.com/sensor-finder
If you feel the temperature & humidity is not reading as desired from
your Breeze Sensor, you can add a separate Thermo-Hygro (TH)
Sensor to your system.
Search for compatible sensors using the station’s
model number (
S81120v2
).
Add-On Sensor TH Set Up
1.
2.
3.
4.
Insert 2 “AA” Batteries into the sensor battery compartment.
Press the
MINUS (-)
button on the station. The outdoor temperature/humidity
readings will flash.
Hold the
MINUS (-)
button to delete the temperature and humidity readings
provided from the Breeze Sensor. The station will begin to search for the
new TH Sensor.
Press the
TX
button inside the sensor battery compartment to transmit a signal.
Once connected, the TH Sensor Icon will appear on the LCD.
Note:
Your station will only show temperature/humidity readings from one sensor (either the
Breeze Sensor or a separate TH Sensor). If readings are lost from one of the sensors,
your station may pick up the readings from the other sensor on its own.
12
Add-On Temperature & Humidity Sensor
EXTRA SENSORS
Lost Connection
Low Battery
The icon will appear when the
sensor batteries needs to be replaced.
•
If the sensor loses connection for any
reason, the station will show NO after
30 minutes of disconnection.
•
The Sensor Reception Icon will
disappear from the LCD and the
station will search for up to 3 minutes
every hour to try to reestablish the
connection.
•
Dashes will show while searching for
the sensor and the icon will flash
for up to 3 minutes or until the sensor
is connected.
•
If no signal is received, the icon will
disappear. NO will again show in the
sensor area.
