La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 10
Temperature Alert Sounds
•
When temperature alert sounds, the corresponding alert icon (bell) will flash.
•
The alert beeps once every minute, until the temperature is out of alert range.
•
Press any button to stop alert. The alert symbol will still show.
•
Turn alert OFF: In normal mode, press the ALERT button to select the alert. With HI
or LO alert selected, press the ▼ button to disarm that alert.
Weather Station
Power Requirements
•
This weather station is powered by a 5 volt AC power adapter
•
Alternatively, optional 3-AAA Alkaline batteries may be used.
12-Hour or 24-Hour time format
•
Time can display in 12-hour (am, pm) or 24-hour format.
•
Default is 12-hour time.
•
Use the
to switch time formats.
Fahrenheit/Celsius
•
to switch between Fahrenheit and Celsius.
Backlight
AC adapter: The backlight is on continuously when operating the weather station with the
5-volt AC adapter.
Note: When the AC adapter is NOT in use, the HI-LOW-OFF light feature is not available.
•
HIGH: The backlight is defaulted to HI at setup when the AC adapter is in use.
•
LOW: Press the HI-LOW-OFF button to dim the backlight.
•
OFF: Press the HI-LOW-OFF button again to turn the backlight off.
•
Press the HI-LOW-OFF button to return to full strength.
Note: When the backlight is off, press any button to activate the backlight for 10 seconds.
Battery power: When operating on battery power only, press and release the any button
and the backlight will show for 10 seconds.
Dashes, HH.H, LL.L or stuck Indoor Temperature/Humidity
Explanation: These symbols are error messages indication the indoor sensor is outside of
its readable range. For indoor readings, this is generally a power related issue.
•
Check that the AC power cord is inserted into a working outlet.
