La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 6
Note: A remote sensor that has fallen into puddle, snow, or other standing water, will likely
have water damage and need replacement. Remote sensors are water resistant, not
waterproof.
Temperature/Humidity Trend Arrows
Explanation: The indoor and remote temperature (2°F / 1°C) and humidity (3% RH) trend
indicators update every 30 minutes or less. These trends represent temperature changes
over the past three hours.
Example: At 11:00, the trend arrows will reflect changes in temperature or humidity since
8:00. At 11:30, the trend arrows will reflect changes in temperature or humidity since 8:30,
etc.
Up Arrow:
•
Temperature has risen in the past 3 hours.
•
Humidity has risen in the past 3 hours.
Right Arrow:
•
Temperature has not changed in the past 3 hours.
•
Humidity has not changed in the past 3 hours.
Down Arrow:
•
Temperature has fallen in the past 3 hours.
•
Humidity has fallen in the past 3 hours.
MIN/MAX Temperature readings
Explanation: The weather station shows the daily minimum and maximum temperatures
each day starting at midnight (12:00 AM). The weather station automatically resets the
MIN/MAX temperatures at midnight (12:00 AM).
•
View MAX data: Press the ▲ button once to view maximum temperature and humidity
values for indoor and remote data.
•
Reset MAX data: Hold the ▲ button for five seconds to reset maximum temperature
and humidity values for indoor and remote data.
•
View MIN data: Press the ▼ button once to view minimum temperature and humidity
values for indoor or remote data.
•
Reset MIN data: Hold the ▼ button for five seconds to reset minimum temperature and
humidity values for indoor and remote data.
Heat Index/Dew Point
Heat Index:
•
Heat Index combines the effects of heat and humidity.
•
Heat Index is what the temperature feels to a human being.
•
As humidity increases, the body is unable to cool effectively.
•
The temperature will feel warmer.
View Heat Index: From the default time display, press the HEAT/DEW button once and
Heat Index will show instead of the remote ambient temperature.
