background image

• Do not mix old and new batteries

• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

• Always purchase the correct size and grade of battery most suitable 

   for intended use.

• Replace all batteries of a set at the same time.

• Clean the battery contacts and also those of the device prior to 

   battery installation.

• Ensure the batteries are installed with correct polarity (+ and -).

• Remove batteries from equipment which is not to be used for an 

   extended  period of time.

• Promptly remove expired batteries.

Care and Maintenance

Warranty and Support

La Crosse Technology, Ltd. provides a 1-year limited time warranty 

(from date of purchase) on this product relating to manufacturing 

defects in materials & workmanship. 

Before returning a product, please contact our friendly 

customer support with questions or visit our online help:

Phone: 

1-608-782-1610  

Online Product Support: 

www.lacrossetechnology.com/support  

Product Registration: 

 

 

   

www.lacrossetechnology.com/support/register 

  

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

Warranty Address:

 

   

La Crosse Technology, Ltd   

 

 

2830 S. 26th St. 

La Crosse, WI 54601

Protected under U.S. Patents:

 5,978,738 | 6,076,044 | RE43903

Page | 9        www.lacrossetechnology.com/support           T83646v2

Summary of Contents for T83646v2













Reviews: