Setup with Multiple Sensors
Channel Indicator | Auto scroll
• Press the
PLUS
button to view remote sensor channels.
• The weather station will automatically scroll through the channels
when the circling arrows show below the channel number.
• Press and release the
PLUS
button to lock the weather station into
one channel.
Note: When multiple remote sensors are used, Heat Index,
Dew Point and Mold Risk will be available for each remote sensor.
Channel Indicator
Channel Scroll
The weather station will accommodate up to three remote sensors
(TX141TH-BCH).
To connect multiple remote sensors to the weather station:
1. Remove the battery cover from all the sensors.
2. Set the first remote sensor to Channel 1 and insert 2 AA batteries.
3. Set the second remote sensor to Channel 2 and insert 2 AA
batteries.
4. Set the third remote sensor to Channel 3 and insert 2 AA batteries.
5. Hold the
INFO
button on the weather station for 5 seconds.
The weather station will search for all remote sensors.
6. Press the
TX
button on each remote sensor to transmit RF signal.
7. When RF connection is established, the temperature & humidity for
each of the selected channels will appear on the main unit.
8. Allow the sensors and the weather station to stay 5-10 feet apart
for 15 minutes to establish a solid connection.
9. Install the battery covers on each sensor.
10. After 15 minutes place the remote sensors in shaded locations.
Press and release the
PLUS
button to view channel 1, 2 or 3 on the
weather station when multiple sensors are used.
Page | 7 www.lacrossetechnology.com/support T83646v2
