background image

Low Battery

•  Battery by Remote Temperature, replace batteries in the sensor.

•  Battery by Indoor Temperature, replace batteries in the weather 
    station.

Indoor use:

 Mount the Remote Sensor indoors to monitor 

high mold risk areas like in a crawl space or basement.

• 

The maximum wireless transmission range to the 

   weather station is over 300 feet (91 meters) in open air.

• 

Walls or floors decrease the transmission range.

Outdoor use:

• 

Be sure the remote sensor is mounted vertically. 

• 

Insert the mounting screw through the front of the 

   sensor and into the wall. 

• 

Tighten the screw to snug (do not over tighten).

• 

Mount the sensor on a north-facing wall or in any well 

   shaded location. Sun will make it read high.

• 

Under an eave or deck rail is preferred. 

• 

Be sure the remote sensor is mounted vertically to drain 

  moisture.

• 

The maximum wireless transmission range is over 300 

   feet (91 meters) in open air, not including walls or 
   floors.

Mount Temperature/Humidity Sensor

MOON PHASE

MOON PHASE

MOON PHASE

MOON PHASE

MOON PHASE

MOON PHASE

MOON PHASE

MOON PHASE

MOON PHASE

MOON PHASE

MOON PHASE

MOON PHASE

Moon Phase

Moon phase is based on the 

lunar calendar and the time and 

date set on the weather station.

T83646v2        www.lacrossetechnology.com/support           Page | 8

Summary of Contents for T83646v2













Reviews: