background image

Outdoor relative humidity measuring 
range: 

1% to 99% with 1% resolution 
(“- - “ displayed if outside this range 

Wind speed measuring range: 

0 to 111.8 mph (0 to 50 m/s) 

Weather Data Checking Interval: 

Indoor temperature checking interval: Every 

15 

seconds 

Indoor humidity checking interval: 

Every 20 seconds 

Outdoor temperature checking interval 

r): 

(remote temperature/humidity senso

Every 128 seconds 

Outdoor humidity checking interval: 

Every 128 seconds 

Wind speed checking interval: 

Average of 128 seconds with highest gust 

Outdoor temperature, humidity and 
wind speed reception (indoor weather 
station): 

Every 128 seconds 

Transmission range: 

300 feet (in open space) 

Power Supply: 

Indoor weather station: 

3 x AA, IEC LR6, 1.5V 

Remote temperature/humidity sensor: 

2 x AA, IEC LR6, 1.5V 

Remote wind speed sensor: 

Supplied by remote temperature/humidity sensor 

Battery life cycle: 

Approximately 12 months 

Recommended battery type: 

Alkaline 

Dimensions (H x W x D): 

Indoor weather station: 

9” x 4.62” x 1.25” 
(227 x 117.4 x 31.2 mm) 

Remote temperature/humidity sensor: 

 

5.4” x 2.25” x 2.25”
(137 x 56.2 x 56.2 mm) 

Remote wind speed sensor: 

7.5” x 2.2” x 2.2” 
(191.2 x 55.8 x 56 mm) 

 

WARRANTY INFORMATION 

a Crosse Technology, Ltd provides a 1-year limited warranty on

fects in materials and workmanship. 

 service 

ucts 

 Crosse Technology, 

tenance); (2) damage occurring during shipment (claims must be 

over 

 
 

 
L

 this product against manufacturing de

 
This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original 
purchaser of this product.  To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and
procedures.  Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center.  The original dated bill of sale must be 
presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or prod
if found to be defective during the limited warranty period specified above.  All replaced parts and products become the property of La
Ltd and must be returned to La Crosse Technology, Ltd.  Replacement parts and products assume the remaining original warranty, or ninety (90) days, 
whichever is longer.  La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty.  If necessary repairs are 
not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination.  The owner must 
pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center.  La Crosse 
Technology, Ltd will pay reasonable return shipping charges to the owner of the product. 
 
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by 
accident, unreasonable use or neglect (including the lack of reasonable and necessary main
presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions 
contained in your owner’s manual; (5) damage resulting from the performance of repairs or alterations by someone other than an authorized La Crosse 
Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the 
products inability to receive a signal due to any source of interference..  This warranty covers only actual defects within the product itself, and does not c
the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performanc
variations resulting from installation-related circumstances. 

Summary of Contents for TX9U








Reviews: