background image

Page | 22

Wi-Fi Wind Station

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.

App Store is a service mark of Apple Inc. 

Google Play and the Google Play logo are trademarks of Google Inc.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the in-

structions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures: 

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver. 

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

—Consult the dealer or an experienced radio/TV technician for help. 

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 

15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the anten-

na(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not 

be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with 

antenna installation instructions and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  

(1) this device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!  

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to 

operate the equipment.

All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, 

mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. 

The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any 

responsibility for any technical error or printing error, or their consequences. 

All trademarks and patents are recognized.

Summary of Contents for V21-WTHV3























Reviews: