13 |
P a g e
7.
Press and release the SET button to confirm and move to the date. 01 and SET DATE will
show. Press and release the PLUS (+) or MINUS (-) button to adjust the date.
8.
Press and release the SET button to confirm and move to select Fahrenheit or Celsius. TEMP
FAHRENHEIT will show. Press and release the PLUS (+) or MINUS (-) button to select Celsius
(°C).
9.
Press and release the SET button to confirm and move to select Inches of Mercury (INHG) or
Hecto Pascal (hPa) pressure readings. BAROMETRIC PRESSURE INHG will show. Press and
release the PLUS (+) or MINUS (-) button to select.
10.
Press and release the SET button to confirm and move to adjust the pressure value.
BAROMETRIC PRESSURE will show and the pressure number will flash. Press and release
the PLUS (+) or MINUS (-) button to adjust.
11.
Press the SET button to confirm and exit.
WEATHER STATION MESSAGES
WHY DOES “LOST WIFI”, ETC., SHOW ON MY STATION?
When operating as a standalone station, you will occasionally see the words SEE APP TO
CONNECT or LOST WIFI.
•
SEE APP TO CONNECT appears at start up is a prompt to connect to the La Crosse View™
app.
•
LOST WIFI again refers to your station searching for a WIFI connection to connect to the
La Crosse View™ app. You station has found a Wi-Fi service and is awaiting a password.
•
These statements should only flash for a few minutes then disappear.
•
They may show again for a few minutes if you restart the station or press and release the
SET button.
When connected you will have these and other status messages available with a press of the
SET button.
ALL OK CONNECTED:
o
Station is connected all the way through to your app.
CHECK APP:
o
The Wi-Fi router connection is working.
o
Check your connection to the La Crosse View app.
o
Check Notifications in the La Crosse View app
o
Is there an update to install?
LOST WIFI:
o
Check your power cord connection (power cord required to connect)
o
When trying to reestablish your station’s Wi-Fi connection, be sure your mobile device is
on the same 2.4GHz network you want your station to use.
o
Enter your Wi-Fi password again.
o
Check your network connection.
o
Hold the + and --- buttons together for 3 seconds to search for Wi-Fi.
