10 |
P a g e
•
24 Hours – Shows rainfall in the past 24 hours as a rolling value that updates every hour to
show the past 24 hours. As time passes without rain, this values will count down to zero.
•
7 Days – Rainfall for the past 7 days. This is a rolling 7 day period, not a Monday through
Sunday record. Updates at midnight each day. As time passes without rain, this values will
count down to zero.
•
Month - Record is from the first day of the month to the last day of the month. When in the
middle of the month, it will show the readings from the first day of the month to the last full
day. Example. If today is the 15
th
of the month, the month rain reading is from the 1
st
to the
14
th
. After midnight, the 15
th
will be included.
Note: Press and release the PLUS (+) button to view up to 11 previous months.
•
Year – Shows rainfall for the current month and the past 11 months combined.
•
Total – Shows all rainfall from the time the station was setup until the station was powered
down or the value was reset. The total rainfall can show years’ worth of data.
Note:
As time passes without rain, the 1 hour, 24 hour, and 7 day rain totals will count down to
zero.
HOW DO I RESET THE RAIN READINGS?
Your rainfall readings are reset individually.
1.
Press and release the RAIN button to view the history reading you wish to reset.
2.
Hold the MINUS (-) button for 5 seconds to reset that rain value to zero.
3.
Press and release the LIGHT button to exit.
HOW OFTEN DOES MY RAIN SENSOR UPDATE?
•
Your Rain Sensor checks for any change in Rainfall every 45 seconds.
•
Any change of 0.2mm of Rainfall will cause the sensor to send a reading.
•
If there is no change in rainfall, the sensor will transmit every 3 minutes to preserve battery
life.
HOW DO I VIEW MY HI AND LO TEMPERATURE/HUMIDITY READINGS?
Your high and low temperature and humidity readings are recorded with time and date of
occurrence. Each time a new high or low reading is recorded, that reading with time and date of
occurrence will show.
To view your HI | LO records, simply press and release the TEMP button.
Viewing order:
•
Outdoor HI Temperature
•
Outdoor LO Temperature
•
Outdoor HI Humidity
•
Outdoor LO Humidity
