02
Initial Setup
Power Up
Note:
It may take up to 10 minutes for your sensor data to appear on your
station’s screen.
BASICS
1.
Unlatch the Locking Tabs on the sides of the Rain Sensor to remove the Funnel.
Then install 2 “AA” batteries into the Battery Compartment.
2.
3.
Install 3 “AA” batteries into the Battery Compartment of your Breeze Pro Sensor.
Insert the Power Cord into a USB Power Adapter (not included), but sure the
adapter is securely plugged into a working outlet. Then insert the Power Jack
end into the back of the station. Remove the Insulation Tab from the station’s
Battery Compartment.
Bottom of Breeze Pro Sensor
Inside of Rain Sensor
Back of Station
Power Jack