La Crosse Technology, Ltd.
Page 4
YEAR
: Hold the SET button to enter Calendar Set. The year will flash. Press and release
the UP or DOWN button to select the correct year. Confirm with the SET button and move to
the month.
MONTH
: The month will flash. Press and release the UP or DOWN button to select the
correct month. Confirm with the SET button and move to the date.
DATE
: The date will flash. Press and release the UP or DOWN button to select the correct
date. Confirm with the MODE button to exit calendar set.
Note:
The weekday will set automatically as you set the year, month and date.
ALARM SET:
From Time Mode, press and release the MODE button once to move to Alarm
Mode. The alarm time will show in the time area and the letters AL will show next to the
temperature.
ALARM HOUR
: Hold the SET button to enter Alarm Set. The hour will flash. Press and
release the UP or DOWN button to select the correct hour. Confirm with the SET button and
move to the minutes.
ALARM MINUTES
: The minutes will flash. Press and release the UP or DOWN button to
adjust the minutes. Confirm with the MODE button to exit.
ALARM ON/OFF
:
Press and release the MODE button to move to Alarm Mode.
ON:
With the Alarm time showing, press and release the UP button to activate the alarm.
When the alarm is active, the alarm icon will display in the upper left corner.
OFF:
With the Alarm time showing and alarm is active, press and release the UP button to
deactivate the alarm. The alarm icon will not appear when the alarm is inactive.
SNOOZE:
When the alarm sounds, press the SNOOZE/LIGHT button to trigger snooze alarm for 4
minutes. The snooze icon
Zz
will flash after the hour.
Press any button to turn off the snooze feature when the snooze alarm sounds. The snooze
icon will disappear
Clock Has Missing Segments
This is generally a power related issue.
may be overpowered or underpowered. Remove batteries from clock.
Press any button 20 times. Leave the clock unpowered for 1-2 hours.
Insert fresh alkaline batteries with correct polarity.
Clock Is Dim
Most clock s have a gray background. Place the clock at eye level. Is it still dim?
Clocks that sit in the sunlight can develop a cloudy film over time.
This is generally a power related issue.
may be overpowered or underpowered. Remove batteries from clock.
Press any button 20 times. Leave the clock unpowered for 1-2 hours.
Install fresh alkaline batteries with correct polarity.
Clock Has Distorted Display
On a brand new clock check for thin plastic films of printed scratch guard that may be on the
upper and lower screen of the clock. This thin piece of plastic has printed numbers for store
displays.
This film will be easy to peel off the LCD.
With all power removed the clock should be blank.
If numbers still appear, please check for scratch guard.
Check that the batteries are installed correctly.
