Replace Wind Cups or Directional Vane
on Cyclone and Glide Sensors
Cyclone Sensor
Glide Sensors
Wind Cups Model:
WCLTV-WSDR1 (Fits Glide and Cyclone sensors)
Wind Directional Vane Model:
WVLTV-WSDR1 (Fits Cyclone Sensors)
Replace Wind Vane - Cyclone Sensors
1. Remove the old wind vane with the screwdriver. Take note of the flat edges located on
the post of the Sensor and inside of the Wind Vane. Align the flat edges and place the new
Wind Vane on the the post of the Sensor.
Tool Required:
Mini screwdriver with Phillips head (not included).
