28
8.
In order to ensure sufficient 868 MHz transmission however, the distance between the Weather Station and the
transmitter should not be more than 100 meters (see notes on “Positioning” and “
868 MHz Reception
”).
IMPORTANT:
Transmission problems will arise if the setting for additional sensors is not followed as described above. Should
transmission problems occur, it is necessary to remove the batteries from all units and start again the set-up from step
1.
RESETTING
The Weather Station and the Thermo-hygro transmitter need to be reset when one of the following conditions occur:
•
Unsuccessful
868MH
z signal reception.
•
Malfunction on the units.
•
Batteries replacement.
For resetting, remove all batteries from the units. Wait at least for 1 minute before powering up the Weather station
again. Proceed from step 1 in “Setting Up”.