38
MANUAL TIME SETTING:
In case the Weather Station cannot detect the DCF-signal (for example due to disturbances, transmitting distance,
etc.), the time can be manually set. The clock will then work as a normal Quartz clock.
1.
The hour digit will start flashing.
2.
Use the OUT/+ key to set the hour.
3.
Press again the SET key to set the minutes. The minute digits start flashing.
4.
Use the OUT/+ key to set the minutes.
5.
Confirm with the SET key and enter the Calendar setting.
Note:
The unit will still try and receive the signal
at 02:00 and 03:00 am
despite it being manually set. When it does receive
the signal, it will change the manually set time into the received time. During reception attempts the DCF tower icon will
Hour flashing
Minutes flashing