25
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units.
Please participate in the preservation of the environment. Return used batteries to an authorized
depot.
SETTING UP
WHEN ONE TRANSMITTER IS USED
1.
First, insert the batteries in the transmitter (see “How to install and replace batteries in the Thermo-hygro
outdoor transmitter”
above
).
2.
Within 2 minutes of powering up the transmitter, insert the batteries in the Weather Station (see “How to install
and replace batteries in the Weather Station”
above
). Once the batteries are in place, all segments of the LCD
will light up briefly
and a short signal tone will sound
. Following the indoor
temperature/humidity
and the time as
0:00 will be displayed. If these information are not displayed on the LCD after 60 seconds, remove the batteries
and wait for at least 60 seconds before reinserting them. Once the indoor data is displayed user may proceed to
the next step.