19
Turn Alarms ON or OFF:
An alarm icon ((
●
)) will appear next to the alarm value set. This indicates the alarm is turned ON. To turn the alarm off Press and hold ALARM
button for about 5 seconds until the alarm time shows in the date area. Press and release the ALARM button to move to Outdoor Temperature high alarm, Outdoor
Temperature low alarm, Outdoor Humidity high alarm, Outdoor Humidity low alarm, and Wind Speed high alarm. In each area press and release the SET button so the
icon ((
●
)) disappears.
Master Buzzer
The Master Buzzer may be used to silence the alarms. The Buzzer will not sound but we can still see the alarm icon ((
●
)) flashing on the base for the Alarm. When any
weather alarm is activated, the particular weather digits will flash to show user that the Alarm is triggered, yet the buzzer will not sound.
To switch off the Buzzer:
1.
In normal display mode, press and hold the SET key until the icon "BUZZER OFF" is shown at the right side above the Wind direction scale. The base will change to
setting mode.
2.
Press ALARM key once to return to the normal display mode. The "BUZZER OFF" icon will still be shown.
To re-enable the Buzzer:
1.
When the BUZZER OFF icon is shown on base, press the SET key shortly and the BUZZER OFF icon will disappear.
2.
Press ALARM key once to return to the normal display mode. The "BUZZER OFF" icon will no longer be shown. Then the alarm will sound normally.
- History
The Weather Center can store up to 140 sets of weather data (not min/max values) which are recorded automatically at 3-hour intervals after the weather center is
powered up, at the nearest time of 0:00, 03:00, 06:00, 09:00, 12:00, 15:00, 18:00 and 21:00.
Each History record includes the Wind Direction,
Wind Speed in Beaufort Scale
, Wind Chill Temperature, Wind Speed, Wind Gust, Outdoor Temperature and Humidity,
Relative Pressure, 24 hour Rainfall, Total Rainfall, Pressure History and Weather Tendency. The Time and Date of history recording will be displayed.
Note:
In order to acquire the correct time of recording of the history records, the Time and Date should be manually set as soon as installing batteries to the Weather Center.
To view the Weather History:
1.
Press the HISTORY key. The latest weather record will be shown with the date and time of recording. The "HISTORY" icon will be displayed at the bottom of the
LCD. HISTORY icon
2.
Press MIN/ MAX to view older records. Press MIN/MAX and PLUS key to view "Previous" and "Next" record respectively. The records are made at 3-hour intervals)
Press the SET key to see items normally viewed in “mode 2”.
- Forecast Icons
Forecast Icon Shows Incorrect Conditions
This feature indicates what the weather may be like 12 hours into the future and not what is happening right now. The weather forecasting feature is estimated to be 75%
accurate. The weather forecast is based solely upon the change of air pressure over time; creating a necessity to disregard all weather forecasting for about 24 hours after
the unit has been set-up, reset, or moved from one altitude to another (i.e. from one floor of a building to another floor). In areas where the weather is not affected by the
change of air pressure, this feature will be less accurate. To adjust forecast settings see section 2.
What Do the Sun/Clouds/Rain Icons Indicate?
Three possible weather icons will be displayed:
Sunny
-indicates that the weather is expected to improve (not that the weather will be sunny).
Sun with Clouds-
indicates that the weather is expected to be fair (not that the weather will be sunny with clouds).
Clouds with Rain
-indicates that the weather is expected to get worse (not that the weather will be rainy).
Forecast Icon is Blinking
Occasionally the word “tendency,” the up (or down) arrow, and the clouds or sun will become animated. This is a visual indication that there has been a recent/sudden
change in the weather conditions.
Generally,
this is the result of a fast low front coming in.
– Display Information
Entire Display is Blank
Batteries:
If your weather station has a blank
display,
it is generally a power issue. Please be sure you are using good alkaline batteries dated at least six years in
advance. Remove the batteries from the unit, press the SET button 20 times to clear any electricity, and install good alkaline batteries.
Segmented Numbers
If your weather station has missing segments on numbers or letters, it is generally a power issue. Please be sure you are using good alkaline batteries dated at least six
years in advance. Remove the batteries from the unit, press the SET button 20 times to clear any electricity, wait 10 minutes with batteries out. Then install good alkaline
batteries.
Display Has Black “ink blob” on it.
If your screen has black on it that may look like and ink blob, this is likely do to the display unit falling or being impacted in some way.
Unfortunately,
this is not a warranty
issue.
– Power Source
Battery Leakage
Battery leakage is not a warranty issue. We recommend you contact the battery manufacturer if this occurs.
Prevention:
Be aware of expiration dates. Do not mix old and new batteries. Install according to proper polarity.
Store batteries at room temperature or allow coming back to room temperature before using.
Remove weak batteries from you device to prevent leakage.
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.