7
°F/°C TEMPERATURE UNIT SETTING
The temperature display can be selected to show temperature data in °F or °C. (default °F)
1.
The temperature unit is flashing
2. Use
the
+
or
MIN/MAX
key to toggle between “°F” or “°C”.
3.
Confirm with the
SET
key and enter the
WIND SPEED UNIT SETTING.
WIND SPEED UNIT SETTING
The wind speed unit can be set as mph (mile per hour), km/h (kilometer per hour), or m/s (meter per second). The default unit is mph.
1. Use
the
+
or
MIN/MAX
key to toggle between the unit “mph”, “km/h” or “m/s”
2.
Confirm with the
SET
key and enter the
RAINFALL UNIT SETTING
.
RAINFALL UNIT SETTING
The rainfall
unit can be set as inch or mm. The default unit is inch.
1. Use
the
+
or
MIN/MAX
key to toggle between the unit “inch” or “mm”
2.
Confirm the unit with the
SET
key and enter the
RELATIVE AIR PRESSURE UNIT SETTING
RELATIVE AIR PRESSURE UNIT SETTING
The relative air pressure can be set as inHg or hPa. The default unit is inHg.
1. Use
the
+
or
MIN/MAX
key to toggle between the unit “inHg" or “hPa”
2.
Confirm the unit with the
SET
key and enter the
RELATIVE PRESSURE REFERENCE VALUE SETTING
.
RELATIVE PRESSURE REFERENCE VALUE SETTING
Note:
The default reference
pressure-value
of the barometer is 29.91inHg when batteries are first inserted.
For an exact measurement, it is necessary to first adjust the
barometer to your local relative air pressure (related to elevation above sea level)
. Ask for the current atmospheric pressure of your home area (Local weather
service, www, optician, calibrated instruments in public buildings, airport).
The relative air pressure can be manually set to another value within the range of 27.17 to 31.90 inHg (919 to 1080 hPa) for a better reference.
1.
The current relative pressure value will start flashing
2. Use
the
+
or
MIN/MAX
key to increase or decrease the value. Continually holding the key will allow the value to increase faster.
3.
Confirm with the
SET
key and enter the
WEATHER TENDENCY SENSITIVITY VALUE SETTING
.
Note:
This feature is useful for those who live at elevations above sea level, but want their air pressure display to be based on sea level elevation.
WEATHER TENDENCY SENSITIVITY LEVEL SETTING
You may select a definite switching sensitivity value, .06, .09, or .12 inHg for the change in the display of weather icons. This represents the "sensitivity" of the weather
forecast (the smaller the value selected, the more sensitive the weather forecast).
The default value is 0.09 inHg. Select lower numbers for high humidity areas, i.e.
Oceanside. Select high numbers for arid areas, i.e. desert.
1.
The sensitivity value will start flashing
2. Use
the
+
or
MIN/MAX
key to select the value.
3.
Confirm with the SET key and enter the
STORM WARNING SENSITIVITY SETTING
.
STORM WARNING THRESHOLD VALUE SETTING
You may also define a switching sensitivity value for the Storm warning display at a decrease of air pressure from .09 inHg to .27 inHg over 6 hours (Default 0.15 inHg).
1.
The sensitivity value will start flashing.
2. Use
the
+
or
MIN/MAX
key to select the value.
3.
Confirm with the
SET
key and enter the
STORM ALARM ON/OFF SETTING
.
STORM ALARM ON/ OFF SETTING
You may also choose to switch On or Off the acoustic Storm warning alarm (Default OFF).
1.
The digit "AOF" will start flashing.
2. Use
the
+
key to switch On or Off the alarm. ("AOF" = OFF; "AON" = On)
3.
Confirm with the
SET
key and the normal display mode will be shown.
Note:
In case a storm warning alarm is activated, the downward weather tendency arrow will be flashing. (Also see
WEATHER TENDENCY INDICATOR
below)
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
