4. Packaged
Contents
5. Setting
up
Before setting up, carefully unpack the contents onto a table or flat surface and
check that the following are complete:
First, choose to use the adaptor (included in this set) or batteries for operation.
Both these methods allow for operation using wireless 433MHz transmission
or cable connection between the base station and the sensors and setting up
for both methods is as follows:
Item:
Consisting
of:
Fittings:
Illustration:
Base
Station
•
Main unit
•
AD/DC 120V power
Adaptor - optional use
(included)
Thermo-
Hygro
Sensor
•
Main unit
•
Rain protection
cover
•
32ft cable - optional
connection to the base
station (included)
•
Wall mounting screws
•
Plastic anchors for
screws
Wind
Sensor
•
Main unit with
wind vane
•
32ft cable
(already
attached to the
main unit)
•
Mast holder
•
2 x U-bolts for mast
holder
•
4 x Washers
•
4 x Nuts
•
1 x screw (to fix main
unit to the mast holder
Rain
Sensor
•
Main unit (base
and funnel)
•
32ft cable
(already
attached to the
main unit)
Heavy
weather
PC
software
CD-Rom format
(English version
only)
•
6.5ft PC cable for PC
connection - optional
use (included)
Base Station:
Note:
flip open the front panel under the PRESSURE, DISPLAY and WIND
keys to reveal the SET, + (plus), - (minus), ALARM and MIN/MAX operation
keys
Battery
compartment
Socket for Thermo-
Hygro Sensor
Socket for
Ad ptor
a
PC COM Port
Front Panel
Operation
Keys
