50
DEFAULT WEATHER ALARM VALUES
Low 960 hPa
Wind gust
High 100 km/h
Pressure
High 1040 hPa
Rainfall in 24 hours
High 50 mm
Low 0
°
C
Temperature (In or
Out)
High 40
°
C
Low 45%
Relative Humidity
(In or Out)
High 70%
PRESSURE ALARMS
1. In the normal display mode, press the ALARM key
once. The high pressure alarm display will be shown.
2. Press and hold the SET key for about 2 seconds. The
pressure digit will start flashing.
3. Press the ▲UP ARROW key or ▼DOWN ARROW
key to set the high pressure alarm value. Hold the
arrow key to change the value faster.
4. Press the ALARM key to confirm the setting. The digit
will stop flashing.
5. Press the SET key to switch the alarm on or off. The
(((
))) icon indicates the alarm is switched on.
6. Press the ALARM key once. The Low Pressure alarm display will be shown.
7. Press and hold the SET key for about 2 seconds. The pressure digit will start
flashing.
8. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the low pressure
alarm value. Hold the arrow key in to change the value faster.
9. Press the ALARM key to confirm the setting. The digit will stop flashing.
10. Press the SET key to switch the alarm on or off. The (((
))) icon indicates the
alarm is switched on.
11. Press the ALARM key to move to the indoor temperature alarm settings.
INDOOR TEMPERATURE ALARMS
1. The high indoor temperature alarm display will be
shown.
2. Press and hold the SET key for about 2 seconds. The
temperature digit will start flashing.
3. Press the ▲UP ARROW key or ▼DOWN ARROW
key to set the high indoor temperature alarm value.
Hold the key to change the value faster.
4. Press the ALARM key to confirm the setting. The digit
will stop flashing.
5. Press the SET key to switch the alarm on or off. The
(((
))) icon indicates that the alarm is switched on.
6. Press the ALARM key once. The low indoor temperature alarm display will be
shown.
