La Crosse Technology WS-2801-IT Instruction Manual Download | Manualshive

Page: 20 / 29

background image

51

7. Press and hold the SET key for about 2 seconds. The temperature digit will start

flashing.

8. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the low indoor

temperature alarm value. Hold the arrow key in to change the value faster.

9. Press the ALARM key to confirm the setting. The digit will stop flashing.
10. Press the SET key to switch the alarm on or off. The (((

))) icon indicates the

alarm is switched on.

11. Press the ALARM key to move to the indoor humidity alarm settings.

INDOOR HUMIDITY ALARMS

1. The high indoor humidity alarm display will be shown.
2. Press and hold the SET key for about 2 seconds. The

humidity digit will start flashing.

3. Press the ▲UP ARROW key or ▼DOWN ARROW

key to set the high indoor humidity alarm value. Hold
the key in to change the value faster.

4. Press the ALARM key to confirm the setting. The digit

will stop flashing.

5. Press the SET key to switch the alarm on or off. The

(((

))) icon indicates the alarm is switched on.

6. Press the ALARM key once. The low indoor humidity alarm display will be shown.
7. Press and hold the SET key for about 2 seconds. The humidity digit will start

flashing.

8. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the low indoor

humidity alarm value. Hold the key in to change the value faster.

9. Press the ALARM key to confirm the setting. The digit will stop flashing.
10. Press the SET key to switch the alarm on or off. The (((

))) icon indicates the

alarm is switched on.

11. Press the ALARM key to move to the outdoor temperature alarm settings.

OUTDOOR TEMPERATURE ALARMS

1. The high outdoor temperature alarm display will be

shown.

2. Press and hold the SET key for about 2 seconds. The

temperature digit will start flashing.

3. Press the ▲UP ARROW key or ▼DOWN ARROW

key to set the high outdoor temperature alarm value.
Hold the key in to change the value faster.

4. Press the ALARM key to confirm the setting. The digit

will stop flashing.

5. Press the SET key to switch the alarm on or off. The

(((

))) icon indicates that the alarm is switched on.

6. Press the ALARM key once. The low outdoor temperature alarm display will be

shown.

«
...
18
19
20
21
22
...
»

Summary of Contents for WS-2801-IT






























Reviews:

No comments

Related manuals for WS-2801-IT

Brand: Xantech Pages: 12

Brand: Bresser Pages: 48

Brand: AcuRite Pages: 4

Brand: Acoustic Research Pages: 2

Brand: Denon Pages: 117

Brand: MDT Technologies Pages: 37

Brand: La Crosse Technology Pages: 24

Brand: i-tec Pages: 36

Brand: Oregon Scientific Pages: 14

Brand: Jensen Pages: 11

Brand: Oregon Scientific Pages: 85

Brand: QZ Pages: 3

Vantage VUE Sensor Suite

Brand: Davis Instruments Pages: 24

Brand: ProXtend Pages: 9

Brand: Oregon Scientific Pages: 2

Brand: Oregon Scientific Pages: 72

Brand: iLive Pages: 8

Brand: iLive Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands