La Crosse Technology WS-2810U-IT Operation Manual Download

Page: 18 / 31

P a g e

| 18

(In or Out)

High 70%

PRESSURE ALARMS

In the normal display mode, press the ALARM key once. The high-pressure alarm display
will be shown.

Press and hold the SET key for about 2 seconds. The pressure digit will flash.

Press the

▲

UP ARROW key or

▼

DOWN ARROW key to set the high-pressure alarm

value. Hold the arrow key in to change the value faster.

Press the ALARM key to confirm the setting. The digit will stop flashing.

Press the SET key to switch the alarm on or off. The (((



))) icon indicates the alarm is

switched on.

Press the ALARM key once. The Low Pressure alarm display will be shown.

Press and hold the SET key for about 2 seconds. The pressure digit will flash.

Press the

▲

UP ARROW key or

▼

DOWN ARROW key to set the low-pressure alarm

value. Hold the arrow key in to change the value faster.

Press the ALARM key to confirm the setting. The digit will stop flashing.

10.

Press the SET key to switch the alarm on or off. The (((



))) icon indicates the alarm is

switched on.

11.

Press the ALARM key to move to the indoor temperature alarm settings.

INDOOR TEMPERATURE ALARMS

The high indoor temperature alarm display will be shown.

Press and hold the SET key for about 2 seconds. The temperature digit will flash.

Press the

▲

UP ARROW key or

▼

DOWN ARROW key to set the high indoor temperature

alarm value. Hold the key in to change the value faster.

Press the ALARM key to confirm the setting. The digit will stop flashing.

Press the SET key to switch the alarm on or off. The (((



))) icon indicates that the alarm

is switched on.

Press the ALARM key once. The low outdoor temperature alarm display will be shown.

Press and hold the SET key for about 2 seconds. The temperature digit will flash.

Press the

▲

UP ARROW key or

▼

DOWN ARROW key to set the low indoor temp alarm

value. Hold the arrow key in to change the value faster.

Press the ALARM key to confirm the setting. The digit will flash.

10.

Press the SET key to switch the alarm on or off. The (((



))) icon indicates the alarm is

switched on.

11.

Press the ALARM key to move to the indoor humidity alarm settings.

Summary of Contents for WS-2810U-IT
































Search results

Summary of Contents for WS-2810U-IT

Reviews:

Related manuals for WS-2810U-IT

Brands by name

Popular brands

La Crosse Technology WS-2810U-IT, Operation Manual

Search results

Summary of Contents for WS-2810U-IT

Reviews:

Related manuals for WS-2810U-IT

Brands by name

Popular brands