background image

 

 

  P a g e

| 29  

FCC STATEMENT 

Statement according to FCC part 15.19: 

This device complies with part 15 of the FCC rules.  Operation is subject to the following two 
conditions: 
(1) 

This device may not cause harmful interference. 

(2) 

This device must accept any interference received, including interference that may 

cause undesired operation. 

Statement according to FCC part 15.21: 

Modifications not expressly approved by this company could void the user's authority to 
operate the equipment. 

Statement according to FCC part 15.105: 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 
 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 
 
 

Summary of Contents for WS-2810U-IT
































Reviews: