NOTE
: When in the 12h mode, there is only a 'PM' display, which appears
under the word TIME. During the 'AM' hours this area will be blank. When
the correct hour is shown, press and release the SET button once.
MINUTES:
The Minutes will now be flashing. Press and release the UP
ARROW or DOWN ARROW button until the correct Minutes are
displayed. Press and release the SET button once.
12/24-HOUR TIME:
A 12h or 24h will be flashing. To change between 12h
and 24h, press and release the UP ARROW or DOWN ARROW button.
When your choice is shown on the display, press and release the SET
button once.
NOTE
: When in 24-hour time the Date will display Day first, then Month.
YEAR
: The Year will be flashing. Press and release the UP ARROW or
DOWN ARROW button until you have set the correct Year. Press and
release the SET button.
MONTH:
The Month will be flashing. Press and release the UP ARROW
or DOWN ARROW button until you have set correct Month. Press and
release the SET button.
DATE
: The Date will be flashing. Press and release the UP ARROW or
DOWN ARROW button until you have set the correct Date. Press and
release the SET button.
FAHRENHEIT/CELSIUS
: Degrees Fahrenheit or Celsius will now be
flashing in the Wind chill, Indoor and Outdoor temperature areas. Press
and release the UP ARROW or DOWN ARROW button to change
between Fahrenheit and Celsius When your choice is shown on the
display, press and release the SET button once.
WIND SPEED UNIT
: Wind Speed units will now be flashing. Press and
release the UP ARROW or DOWN ARROW button to select from mph,
m/s, knots, Beaufort, or km/h. When your choice is shown on the display,
press and release the SET button once.
RAIN UNIT
: Rainfall Inches or Millimeters will now be flashing. Press and
release the UP ARROW or DOWN ARROW button to select in or mm.
When your choice is shown on the display, press and release the SET
button once.
PRESSURE UNIT:
The Air Pressure units (inHg or hPa) will now be
flashing. Press the UP ARROW or DOWN ARROW button to select inHg
or hPa. The Default setting is inHg. Press and release the SET button.
RELATIVE PRESSURE SETTING:
The Relative Air Pressure will be
flashing. Press the UP ARROW or DOWN ARROW button to adjust the
Relative Air Pressure.
NOTE
: Refer to your local weather station for an appropriate setting. It is
important that this setting be adjusted for local conditions to ensure
forecast accuracy. Press and release the SET button.
FORECAST SENSITIVITY:
Now the Forecast Sensitivity will be flashing.
The default setting of .09 works well in most areas of the country, however
in areas with relatively constant pressure this should be set to .06, (within
30 miles of the coast) and in areas with significant pressure changes this
