La Crosse Technology WS-2812U-IT Operation Manual Download

Page: 19 / 31

P a g e

| 19

INDOOR HUMIDITY ALARMS

The high indoor humidity alarm display will be shown.

Press and hold the SET key for about 2 seconds. The humidity digit will flash.

Press the

▲

UP ARROW key or

▼

DOWN ARROW key to set the high indoor humidity

alarm value.

Press the ALARM key to confirm the setting. The digit will stop flashing.

Press the SET key to switch the alarm on or off. The (((



))) icon indicates the alarm is

switched on.

Press the ALARM key once. The low indoor humidity alarm display will be shown.

Press and hold the SET key for about 2 seconds. The humidity digit will flash.

Press the

▲

UP ARROW key or

▼

DOWN ARROW key to set the low indoor humidity

alarm value.

Press the ALARM key to confirm the setting. The digit will stop flashing.

10.

Press the SET key to switch the alarm on or off. The (((



))) icon indicates the alarm is

switched on.

11.

Press the ALARM key to move to the outdoor temperature alarm settings.

OUTDOOR TEMPERATURE ALARMS

The high outdoor temperature alarm display will be shown.

Press and hold the SET key for about 2 seconds. The temperature digit will flash.

Press the

▲

UP ARROW key or

▼

DOWN ARROW key to set the high outdoor temp alarm

value. Hold the key in to change the value faster.

Press the ALARM key to confirm the setting. The digit will stop flashing.

Press the SET key to switch the alarm on or off. The (((



))) icon indicates that the alarm

is switched on.

Press the ALARM key once. The low outdoor temperature alarm display will be shown.

Press and hold the SET key for about 2 seconds. The temperature digit will flash.

Press the

▲

UP ARROW key or

▼

DOWN ARROW key to set the low outdoor temp alarm

value. Hold the arrow key in to change the value faster.

Press the ALARM key to confirm the setting. The digit will flash.

10.

Press the SET key to switch the alarm on or off. The (((



))) icon indicates the alarm is

switched on.

11.

Press the ALARM key to move to the outdoor humidity alarm settings.

Summary of Contents for WS-2812U-IT
































Search results

Summary of Contents for WS-2812U-IT

Reviews:

Related manuals for WS-2812U-IT

Brands by name

Popular brands

La Crosse Technology WS-2812U-IT, Operation Manual

Search results

Summary of Contents for WS-2812U-IT

Reviews:

Related manuals for WS-2812U-IT

Brands by name

Popular brands