P a g e
| 20
OUTDOOR HUMIDITY ALARMS
1.
The high outdoor humidity alarm display will be shown.
2.
Press and hold the SET key for about 2 seconds. The humidity digit will flash.
3.
Press the
▲
UP ARROW key or
▼
DOWN ARROW key to set the high outdoor humidity
alarm value.
4.
Press the ALARM key to confirm the setting. The digit will stop flashing.
5.
Press the SET key to switch the alarm on or off. The (((
))) icon indicates the alarm is
switched on.
6.
Press the ALARM key once. The low outdoor humidity alarm display will be shown.
7.
Press and hold the SET key for about 2 seconds. The humidity digit will flash.
8.
Press the
▲
UP ARROW key or
▼
DOWN ARROW key to set the low outdoor humidity
alarm value.
9.
Press the ALARM key to confirm the setting. The digit will stop flashing.
10.
Press the SET key to switch the alarm on or off. The (((
))) icon indicates the alarm is
switched on.
11.
Press the ALARM key to move to the outdoor temperature alarm settings.
WIND GUST ALARM
1.
The wind gust alarm display will be shown.
2.
Press and hold the SET key for about 2 seconds. The wind gust digit will flash.
3.
Press the
▲
UP ARROW key or
▼
DOWN ARROW key to set the wind gust alarm
value.
4.
Press the ALARM key to confirm the setting. The digit will stop flashing.
5.
Press the SET key to switch on or off the alarm. The (((
))) icon indicates the alarm is
switched on.
6.
Press the ALARM key to move to the wind direction alarm settings.
WIND DIRECTION ALARM
Multiple wind direction alarms can be set simultaneously if desired.
1.
The wind direction alarm display will be shown.
2.
Press and hold the SET key for about 2 seconds. The wind direction arrow on the outside
of the compass circle will flash with the corresponding compass direction or degrees
reading displayed in the center of the compass.
3.
Press the
▲
UP ARROW key or
▼
DOWN ARROW key to move the wind direction alarm
pointer.
4.
Press the SET key to set a wind direction alarm value. A pointer icon will appear inside
of the compass circle to indicate an alarm setting for that wind direction.
5.
To remove an alarm setting for a wind direction, press the SET key again to remove the
selected wind direction alarm. The arrow icon inside the compass circle will disappear.
6.
If more than one wind direction is desired as an alarm setting, Press the
▲
UP ARROW
key or
▼
DOWN ARROW key to move the wind direction alarm pointer to the next
desired setting.
