P a g e
| 25
3.
MIN/MAX outdoor temperature with the date and time of recording
4.
MIN/MAX dew point temperature with the date and time of recording
5.
MIN/MAX outdoor humidity with the date and time of recording
6.
MAX wind gust with the date and time of recording
7.
Total rainfall with the date the rainfall total was last reset. If the rainfall total has not
yet been reset, "---. --. ---- will be displayed for the date.
RESET THE MIN/MAX WEATHER DATA
1.
Press MIN/MAX key to show the desired weather data.
2.
Press
▲
UP ARROW key. The stored value will be reset to the current value and current
time. To reset the MIN/MAX weather data, you need to reset each of the values
independently.
TOTAL RAINFALL AMOUNT
The total rainfall measurement is displayed in the unit of mm or inch. It shows the total rainfall
accumulated since last reset of the total rainfall amount.
In either Mode 1 or Mode 2 display, press the MIN/MAX key until the display shows the total
rainfall value.
To reset the rainfall reading, press the
▲
UP ARROW key. The total rainfall amount will be reset
to 0, and the time is updated to current time.
Note:
Until the first rainfall total reset is performed, the time and date of the total rainfall
are displayed as "- - -.--.----". After the rainfall total is reset, the rainfall total display will indicate
the date and time of the last rainfall total reset.
CARE AND MAINTENANCE:
Extreme temperatures, vibration and shock should be avoided as these may cause damage
to the unit and give inaccurate forecasts and readings.
Precautions shall be taken when handling the batteries. Injuries, burns, or property damage
may be resulted if the batteries are in contact with conducting materials, heat, corrosive
materials or explosives. The batteries shall be taken out from the unit before the product is
to be stored for a long period of time.
Immediately remove all low powered batteries to avoid leakage and damage. Replace only
with new batteries of the recommended type.
When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or
scouring agents as they may mark the LCD and casings.
Do not submerge the unit in water.
Special care shall be taken when handling a damaged LCD display. The liquid crystals can be
harmful to user's health.
MAX icon
