16
With ٭MINMAX٭ the below shown menu step is activated, which in
return leads to the displays of the stored Min/Max values by use of
٭MIN٭ / ٭MAX٭, which on their part again can be directly selected.
Note:
During individual displays of the stored Min/Max values the top
line of the LCD screen will automatically display the time and
date of their storage.
The following menu item will appear upon touching the display labelled
٭ALARMS٭.
Because of the constant access to the respective opposite menu item
٭MINMAX٭/٭ALARMS٭, it is possible at any time to toggle between
the MIN/MAX and ALARMS value displays.
Any action can immediately be terminated through ٭EXIT٭.
6
Radio-Controlled WWVB Clock
The Radio-Controlled WWVB Clock is normally controlled by the radio
signal of the WWVB time code transmitter and will thus set time and
date automatically. Under bad reception conditions however both can
be set manually as follows:
Setting the Time
The action is started by touching the time display in the TIME section
of the Touch Screen.
