8
4 Setting
Up:
Note:
Because of the default settings already determined by
the manufacturer, it may not be necessary to alter the
basic settings other than Relative Air Pressure (see
further down) If changes to the settings are needed, they
can easily be made if desired.
Touching the screen in the center of the text display within the
bottom two lines of the LCD will enter into the menu shown
below.
Touching the
٭
SETUP
٭
field will enter the setup mode.
The basic settings can now be performed in the following
successive order:
LCD Contrast
→
Contrast can be set in 8 steps from 0 to 7
(Default is 4).
Time Zone
→
Time Zones can be set in a range from
-12 to +12 hours.
Note:
U.S.A. time zones will be displayed (not in hours) but in
the respective time zone abbreviations:
-4 h
→
ATL (Atlantic Time)
-5 h
→
EST (Eastern Standard Time)
-6 h
→
CST (Central Standard Time)
-7 h
→
MST (Mountain Standard Time)
-8 h
→
PST (Pacific Standard Time)
-9 h
→
ALA (Alaska Time)
-10 h
→
HAW (Hawaiian Time)
(Default is -5 h
→
EST (Eastern Standard Time).
