35
Mounting the thermo/hygro Sensor
An ideal mounting place for the thermo/hygro sensor would
be the outer wall beneath the extension of a roof, as this will
protect the sensor from direct sunlight and other extreme
weather conditions.
To wall mount, use the 2 screws to affix the wall bracket to the
desired wall, plug in the thermo/hygro sensor to the bracket and
secure both parts by the use of the supplied screw and ensure
that the cables from the wind and rain sensors are correctly
plugged in otherwise data transmission errors could occur.
NOTE: For best 433 MHz reception mount the thermo/hygro
sensor on an outside wall near the location of the base station.
MAINTENANCE AND CARE
1. Extreme temperatures, vibrations, and shock should be
avoided to prevent damage to the units
Rain Cover
Wall Bracket
Main Unit
